Хотите получать информацию по новым курсам и их датам проведения?
(CIERS2) Cisco Internetwork Expert Routing & Switching 2
Кому следует посетить
The primary audience for this course follows:
- Network engineers that need be able to use an expert-level, problem-solving process including the Options Analysis method to support complex network technologies and topologies when both configuring and troubleshooting an internetwork
The secondary audience for this course follows:
- Network designers that design and support complex network technologies and topologies
Сертификации
Этот курс является частью следующих программ сертификаций:
- Cisco Certified Internetwork Expert Routing & Switching (CCIERS Routing & Switching)
Предварительные требования
To gain the prerequisite skills and knowledge, learners must have passed the Cisco CCIE Routing and Switching written exam.
Before taking Cisco 360 CCIE R&S Advanced Workshop 2, learners should be very familiar with the topics that are covered in CIERS1. It is also strongly recommended that learners perform two self-paced, graded assessment exams before attending this course. Learners should be able to demonstrate advanced-level competencies (knowledge and skills) that are equivalent to the following from both configuration and troubleshooting perspectives:
- Perform expert-level tasks involving WAN technologies and switched Ethernet networks
- Perform expert-level tasks involving Routing Information Protocol version 2 (RIPv2), Enhanced Interior Gateway Routing Protocol (EIGRP), and Open Shortest Path First (OSPF)
- Perform expert-level tasks for route redistribution
- Perform expert-level tasks for Border Gateway Protocol (BGP)
- Perform expert-level tasks for IPv4 multicast
- Perform expert-level tasks for IPv6 unicast and multicast connectivity
- Perform expert-level tasks for router quality of service (QoS) using the Modular QoS CLI (MQC)
Several training courses are available through Cisco Learning Partners that are recommended to meet the prerequisites:
Cisco CCNP
- Осуществление IP маршрутизации Cisco (2.0) (ROUTE)
- Внедрение коммутируемых сетей Cisco (2.0) (SWITCH)
- Поддержание в рабочем состоянии, а также поиск и устранение неполадок в IP сетях Cisco (2.0) (TSHOOT)
Beyond CCNP
- Реализация QOS в сетях предприятия (версия 2.5) (QOS)
- Настройка BGP на маршрутизаторах Cisco® 4.0 (BGP)
- Развертывание протоколов маршрутизации в сетях сервис провайдеров, построенных на оборудовании компании Cisco (SPROUTE)
- Развертывание расширенных функций маршрутизации в сетях сервис провайдеров, построенных на оборудовании компании Cisco (SPADVROUTE)
Цели курса
Upon completing this course, the learner will be able to meet these overall objectives:
- Perform expert-level tasks involving both configuring and troubleshooting WAN technologies and switched Ethernet networks
- Perform expert-level tasks involving both configuring and troubleshooting RIPv2, EIGRP, and OSPF
- Perform expert-level tasks for both configuring and troubleshooting route redistribution
- Perform expert-level tasks for both configuring and troubleshooting BGP
- Perform expert-level tasks for both configuring and troubleshooting MPLS Layer 3 VPNs
- Perform expert-level tasks for both configuring and troubleshooting IPv4 multicast
- Perform expert-level tasks for both configuring and troubleshooting IPv6 unicast and multicast connectivity
- Perform expert-level tasks for both configuring and troubleshooting router QoS using the MQC
- Perform expert-level tasks for both configuring and troubleshooting Cisco Catalyst 3560 Series QoS
- Perform expert-level tasks for both configuring and troubleshooting IP services
Содержание курса
Cisco 360 CCIE R&S Advanced Workshop 2 (CIERS2) v5.0 teaches learners how to use an expert-level, problem-solving process including the Options Analysis method to support complex network technologies and topologies. This course is part of a blended learning curriculum that supports expert-level preparation in routing and switching. This course has been updated to reflect the recent changes in the Cisco CCIE R&S lab that is implemented in the version 5 blueprint.
Программа курса
Module1: Formulating a Final-Phase CCIE Preparation Strategy
- Differentiate an expert-level lab into well-defined subtopics
- Perform mental simulations and the Options Analysis method
- Test rigorously and verify Cisco IOS Software-based configurations
- Formulate and apply applicable internetworking techniques
Module 2: Troubleshooting Cisco Networks
- Describe an overview of the CCIE R&S troubleshooting section
- Review the troubleshooting method that is outlined in the CCIE v5 blueprint
- Describe an approach to forming a hands-on CCIE troubleshooting template for connectivity issues
360RSW-LAB-TA03 and 360RSW-LAB-CA03: Two Separate Sections for Troubleshooting and Configuration
Troubleshooting Section:
- Incident 1: Layer 3—IP Protocol Independent Multicast (PIM) SSM
- Incident 2: Layer 3—OSPF
- Incident 3: Layer 2—Ethernet Switching
- Incident 4: Layer 3—MP-BGP VPNv4 Redistribution
- Incident 5: Layer 3—Route Targets Export and Import
- Incident 6: Layer 3—IPv6 Routing
- Incident 7: Layer 3—BGP
- Incident 8: Security—PPP CHAP Authentication
- Incident 9: Services—HSRP
- Incident 10: Security—Zone-Based Firewall
Configuration Section:
- Task 1: DMVPN and Serial Communications
- Task 2: Switch Configuration
- Task 3: IPv4 OSPF
- Task 4: IPv4 EIGRP
- Task 5: IPv4 RIP
- Task 6: Reliable Static Routing and NAT
- Task 7: Border Gateway Protocol
- Task 8: IPv6 Routing
- Task 9: Security
- Task 10: QoS
- Task 11: Address Administration
- Task 12: HSRP Gateway Redundancy
- Task 13: NTP Configuration
- Task 14: Multicast Configuration
- Task 15: SNMP
360RSW-LAB-TA04 and 360RSW-LAB-CA04: Two Separate Sections for Troubleshooting and Configuration
Troubleshooting Section:
- Incident 1: Layer 3—IPSEC VPN
- Incident 2: Layer 2—PPP
- Incident 3: Layer 3—OSPF
- Incident 4: Layer 3—EIGRP
- Incident 5: Layer 3—RIP
- Incident 6: Layer 3—BGP
- Incident 7: Layer 3—PBR
- Incident 8: Application—QoS RSVP
- Incident 9: Services—GLBP
- Incident 10: Security—SSH
Configuration Section:
- Task 1: DMVPN and Serial Communications
- Task 2: Switch Configuration
- Task 3: IPv4 OSPF
- Task 4: IPv4 EIGRP
- Task 5: IPv4 RIP
- Task 6: Border Gateway Protocol
- Task 7: IPv6 Routing
- Task 8: Security
- Task 9: QoS
- Task 10: NTP
- Task 11: Cisco IOS Software Services
- Task 12: Multicast
- Task 13: Address Administration
360RSW-LAB-TA05 and 360RSW-LAB-CA05: Two Separate Sections for Troubleshooting and Configuration
Troubleshooting Section:
- Incident 1: Layer 3—BGP
- Incident 2: Layer 3—RIP
- Incident 3: Layer 3—BGP Interior Gateway Protocol (IGP) Redistribution
- Incident 4: Layer 3—OSPF
- Incident 5: Layer 2 and Layer 3—EIGRP and Ethernet Switching
- Incident 6: Layer 3—IPv6 Routing
- Incident 7: Layer 3—Multicast
- Incident 8: Services—Reliable Static Route
- Incident 9: Services—TFTP
- Incident 10: Management—EEM
Configuration Section
- Task 1: DMVPN and Serial Communications
- Task 2: Secure DMVPN
- Task 3: Switch Configuration
- Task 4: Cisco IOS Features
- Task 5: IPv4 OSPF
- Task 6: IPv4 EIGRP
- Task 7: IPv4 RIP
- Task 8: BGP
- Task 9: MPLS/VPN Section
- Task 10: IPv6 OSPFv3 Routing
- Task 11: IPv6 EIGRP Routing
- Task 12: IPv6 Connectivity
- Task 13: QoS
- Task 14: Gateway Redundancy
- Task 15: Multicast
360RSW-LAB-TA06 and 360RSW-LAB-CA06: Two Separate Sections for Troubleshooting and Configuration
Troubleshooting Section:
- Incident 1: Layer 2—PPP Multilink
- Incident 2: Layer 3—OSPF
- Incident 3: Layer 3—EIGRP
- Incident 4: Layer 3—MPLS
- Incident 5: Layer 3—BGP
- Incident 6: Layer 3—IPv6
- Incident 7: Layer 3—Multicast
- Incident 8: Application—Accounting
- Incident 9: Services—NTP
- Incident 10: Security—BGP Security
Configuration Section:
- Task 1: Serial and Static VTI Communications
- Task 2: Switch Configuration
- Task 3: VPN
- Task 4: IPv4 OSPF
- Task 5: IPv4 EIGRP
- Task 6: IPv4 RIP
- Task 7: IPv4 Redistribution
- Task 8: Border Gateway Protocol
- Task 9: Gateway Redundancy
- Task 10: Multicast
- Task 11: Traffic Administration
- Task 12: Network Address Translation
360RSW-LAB-TA07 and 360RSW-LAB-CA07: Two Separate Sections for Troubleshooting and Configuration
Troubleshooting Section:
- Incident 1: Layer 3—OSPF
- Incident 2: Layer 3 – EIGRP
- Incident 3: Layer 3— RIP
- Incident 4: Layer 3—BGP
- Incident 5: Layer 3—Universal IPv4 Connectivity
- Incident 6: Layer 3—IPv6 Routing
- Incident 7: Layer 3—Multicast
- Incident 8: Services—IP SLA
- Incident 9: Services—QoS and Embedded Packet Capture
- Incident 10: Layer 2 and Layer 3—Backbone Connectivity
Configuration Section:
- Task 1: IPsec VTI Communications
- Task 2: Switch Configuration
- Task 3: IPv4 OSPF
- Task 4: IPv4 EIGRP
- Task 5: IPv4 RIP
- Task 6: IPv4 Redistribution
- Task 7: Border Gateway Protocol
- Task 8: IPv6
- Task 9: Gateway Redundancy
- Task 10: Multicast
| Дни | 5 дней |
|---|---|
| Дата курса | По запросу |
| Город | Все города |